Have You Considered a Gravel Driveway?

driveway paving in Glen Burnie - A&M Asphalt Paving

Are you looking at options for driveway paving in Glen Burnie or elsewhere in the Anne Arundel County area? If you live in a rural area or have a long, winding driveway, a gravel driveway may suit you. Regardless of what material you choose, it’s important to hire a professional to handle your driveway paving needs. A&M Asphalt Paving can expertly install everything from gravel to tar and chip, and asphalt. We can also help you determine what kind of driveway is best for your property.

Pros of Gravel Driveway

Gravel driveways are affordable, customizable, and easy to put down. There are numerous types of rocks to choose from and it’s one of the least expensive types of driveways. A gravel driveway will compliment any type of architecture, giving it a classic look. They are also economically friendly as the rainwater can replenish the groundwater. Plus, a well-maintained gravel driveway can also last for many years.

Cons of Gravel Driveway

Unfortunately, weeds are known to pop up through the gravel driveway. Therefore, you will need a weed killer or apply a herbicide to the gravel driveway to avoid unsightly weeds. Additionally, since vehicles will be driven on the gravel driveway, over time the weight may cause a rut or hole. Make sure to smooth the surface occasionally to avoid holes that may become filled with water.

Rock Types Used for A Gravel Driveway

A gravel driveway uses at least three layers of rock types. Base gravel, crushed stone, quarry process stone, pea gravel, Jersey Shore gravel, river rock, and marble gravel are types of rock to choose from for your gravel driveway. Base gravel is made from irregular rock fragments and is used as the foundation and ensures proper drainage. Crushed stone can be used as the middle layer and is a light gray color. Quarry process stone and pea gravel can be used as the top layer. Quarry process stone is made up of small pieces that are dark gray while pea gravel is multicolored and smooth.

Driveway Paving in Glen Burnie

With over 30 years of experience, A&M Asphalt Paving installs and maintains all kinds of driveways. We can re-surface asphalt, perform line striping and stenciling, perform a complete driveway rip-out and more! Contact us today for a free estimate!

Signs Your Parking Lot Lines Need Replacing

asphalt paving companies in MD -- A&M Asphalt Paving

Parking lot lines play a critical role in enhancing the utility and safety of parking areas. Lines and stripes act as guides, helping drivers park appropriately and comply with traffic rules. Unfortunately, the stripes fade with time due to exposure to the elements and must be redone to maintain order on the parking lot. If the lines on you parking lot are in bad shape it is time to look into reputable asphalt paving companies in MD to repaint them. At A&M Asphalt Paving we provide excellent line striping and stenciling. Please read on for some signs that you need to re-stripe your parking lot.

Chaotic Parking

When the lines are blurred or wholly deleted in some parts, drivers are unsure of the boundaries. They may park too close to each other or get into each other’s way, making it hard to exit the parking lot. Not only does it inconvenience drivers, but it also means that the parking space can no longer fit the optimal number of vehicles.

Sometimes the disorderly set up of the parking space may lead to incidences of traffic rules violations. There may be an increase in collisions as drivers attempt to reverse or enter parking spaces, which is an indicator of the poor conditions of lines and stripes.

Drivers Ignoring Handicap Spots

Most parking lots have handicap-accessible spots that enable physically disabled persons to use convenient parking places. If the handicap symbols are worn out, drives will not see them. Then, even some well-meaning drivers end up taking spots reserved for disabled customers.

Damaged Wheel Stops

If drivers cannot see the stripes, they may drive beyond the limit causing damage to the wheel stops. Most of the damage results from the bumper hitting the wheel stop. Of course, damage happens every once in a while, but if the incidences have risen in recent weeks, it may be an indicator of faded stripes.

Breaking the Fishbone

Most asphalt paving companies in MD design parking lots using the fishbone pattern. In this arrangement, drivers follow a lane that leads to their chosen spot. If there is an increase in infringements on the setup, then the stripes may be blurred.

Top Asphalt Paving Companies in MD

A&M Asphalt Paving is one of the most respectable asphalt paving companies in MD. We offer top-quality line painting to make your lot safer. Contact us for a free estimate on asphalt and driveway sealcoating, line painting, and paving.

What is the Recommended Thickness for Blacktop?

blacktop paving company in MD -- A&M Asphalt Paving

When it comes to a driveway installation project, there are a lot of questions to ask. After deciding you want to use asphalt, there may be confusion about how thick that asphalt should be. If the asphalt is too thin, it can lead to early repairs or replacement. On the other hand, unnecessarily thick asphalt is expensive and redundant. A&M Asphalt Paving is a blacktop paving company in MD that knows the perfect asphalt thickness for any driveway.

How Thick Should an Asphalt Driveway Be?

Unfortunately, there is no one-size-fits-all answer to this question. However, most experts can agree that a full-depth asphalt driveway is the best way to ensure a long-lasting asphalt surface.

A full-depth asphalt driveway is one that is made entirely of asphalt. The asphalt paving mixture is used from the soil subgrade to the top layer. For most cases, this top layer of asphalt of four inches or more is considered “adequate,” while 5-6 inches results in a driveway that is stronger and more stable.

A secondary option is pouring asphalt onto an aggregate base. An aggregate base is usually made up of crushed rock. However, this option isn’t as ideal as a full-depth asphalt driveway. On average, one inch of asphalt pavement is equivalent to three inches of aggregate base. As a result, choosing an aggregate base over a full-depth asphalt driveway will require a much thicker driveway overall.

Top Blacktop Paving Company in MD: A&M Asphalt Paving

Each project is different and has external circumstances that may impact the driveway installation. The best course of action is to consult a professional for the best solution for any asphalt needs. When searching for a company to install your driveway, it’s essential to conduct thorough research. A&M Asphalt Paving brings over 30 years of experience and expert advice to every job.

For anyone looking for a blacktop paving company in MD, A&M Asphalt Paving is the number one choice. At A&M Asphalt Paving, we specialize in residential driveway paving. Services offered by A&M Asphalt Paving include new asphalt construction, resurfacing, or patching for parking lots and driveways, seal coating, stone & grading driveways, and snow removal. A&M works with both residential and commercial clients. Contact us today for a free estimate on any project.

Asphalt Paving Lasts Longer with Proper Drainage

asphalt paving in Catonsville MD -- A&M Asphalt Paving

Because water damages the bond between the asphalt binder and the rocks and sand, the single-most important factor to ensure long-lasting asphalt is proper drainage. Major problems result if water isn’t drained away from the paved areas. Eventually, the standing water breaks down the asphalt forming potholes. Therefore, it is important to make sure that your driveway has proper drainage and no puddles. If you need professional asphalt services, look no further than A&M Paving. We provide top-quality asphalt paving in Catonsville MD and all over the Baltimore area.

Surface Drainage

Achieve proper surface drainage by building in sufficient crossfall for the water to run off the face of the asphalt by the shortest route. Water must be directed away from the surface and into proper drainage structures. If the water stays on the surface it can cause dangerous conditions. In cold weather water will make asphalt slick and may freeze resulting in an icy and hazardous situation.


Subdrainage is essential to prolong the life of a paved surface. This involves installing filters around drainage pipes to enhance drainage. The filters allow water to flow through the drainage system while preventing small particles from escaping the soil. Most subgrade soils consist of washed mortar sand which is a clean and consistently sized sand. The permeability of this mortar sand is low requiring perforated pipes to be installed for proper drainage.

A&M Asphalt Paving

If you want to ensure you’re receiving quality asphalt paving and services discover A&M Paving. A&M Paving provides asphalt paving in Catonsville, MD, and the entire Baltimore area. Our results are second to none. Asphalt paving and maintenance from A&M Paving means your driveway or parking area lasts for years. Additionally, A&M also offers the following services:

  • Parking Lot Paving
  • Sealcoating
  • Snow Removal

You can depend on A&M Paving to provide you with quality services at a fair price. Rest assured your paving project will be completed correctly so that your asphalt surface will last a long time. If you’re interested in our paving or other services, then don’t hesitate to contact us today for a free estimate.


Preparing Your Driveway Now for Winter

asphalt paving company in MD -- A&M Asphalt Paving

Though the weather is still nice, it won’t be warm and sunny for long. Winter brings many changes into our lives, and now is the time to start preparing for the snow, ice, and freezing temperatures. Before the weather changes, one of the areas of your home that you need to look at is your driveway. Freezing temperatures can take a toll on your asphalt driveway. Frozen precipitation puts pressure on your asphalt leading to foundation problems. And, before you know it, simple fixes become complicated and expensive repair projects. To prevent this, it’s important that you are proactive, take necessary steps, or even hire an asphalt paving company in MD to prepare for the cold weather.

Check and Seal Cracks

First, inspect to determine if the driveway has any cracks. If so, the cracks must be filled before the snow starts to fall. If you leave cracks open throughout the winter season, they are only going to get bigger. When snow and ice melt, water overflow leaks through the cracks. If the temperatures get cold again, that water freezes, expanding the cracks.

Keep Your Driveway Clean

Leading up to winter, you need to make sure your driveway is clear from any debris, dirt, leaves, twigs, weeds, and stones. If these things are left on your driveway, they can permanently damage it once the weight of snow and ice presses them. Oil can also cause some deterioration to your driveway if left to mixed with the snow. Power wash your driveway before the first snowfall to ensure there won’t be any problems.

Also, after the snow and ice hit the ground, make sure you clear the driveway as quickly as possible and try and keep it clean. Now is the time to ensure that your snow removing tools are in proper working condition. Chipped shovels can further damage your driveway if they get caught in a crack. Most snow blowers will need tune-ups after sitting unused during all the warmer months.

Need an Asphalt Paving Company in MD?

Applying a quality sealant to your asphalt driveway will protect it from the cold weather. Sealant provides an extra layer of protection that resists damage from melting snow, ice melts, motor oil and gasoline.

If you have questions about how to prepare your driveway for the winter, consider A&M Asphalt Paving. We are an experienced, professional asphalt paving company in MD, serving the Baltimore area. We excel at new asphalt construction, asphalt patching, seal coating, and snow removal. No matter the season, we are here to keep your driveway looking fantastic .  Contact us today for more information and a free estimate!

Asphalt Removal or Overlay?

asphalt paving in Crofton MD -- A& Asphalt Paving

Looking to enhance the look of your driveway? There are two options to consider when planning to restore the surface of your existing asphalt pavement. Option one: completely replace the existing asphalt. Alternatively, prepare the existing asphalt surface and apply an overlay on top of it. At A&M Asphalt Paving in Crofton MD we are experts in both procedures. Here are a few things you should know about each option before making a decision.

Asphalt Removal

Tearing out an old asphalt driveway and installing a new one is the best way to restore a driveway, parking lot, or paved area. This method is expensive compared to resurfacing. However, it offers more long-lasting results.

During asphalt removal, we completely remove the old asphalt and then lay a 4″ layer of  gravel for good drainage. Next, we apply a course of compacted asphalt to act as a base before adding a surface layer of crushed asphalt on top of it.

Asphalt Overlay

This technique is not as long-lasting as removing the old driveway, but it offers a cost savings. However, when done well, this option still delivers a durable driveway that can rival a freshly installed asphalt pavement.

If you consider this option, the main point of focus should be why the current driveway is failing. A thorough inspection should be carried out to determine if the base asphalt is strong enough to support the overlay. If you just put new asphalt on top of existing problems, you’ll only make the problem worse instead of solving it.

The existing surface needs proper preparation to prepare for bonding with the overlay. It should be inspected, cleaned, repaired, leveled, and then coated with a binding agent. The existing pavement won’t provide adequate structural support to an overlay if that’s not done. The results will be premature driveway failure through cracks and other deformations.

Professional Asphalt Paving in Crofton MD

Looking for asphalt paving in Crofton MD or elsewhere in Anne Arundel County? At A&M Paving we’re are a fully licensed and insured asphalt paving company with extensive experience in both asphalt removal and overlay methods. We have over 30 years of experience in this industry and serve both residential and commercial clients. We provide free estimates to help you weigh the pros and cons of both asphalt paving options. Contact us today for more information and a free estimate!

Top FAQs for Asphalt Paving in Annapolis

asphalt paving in Annapolis MD -- A&M Paving

The appearance of your parking lot or driveway can tell a lot about you, your home, or business. It’s one of the first points of contact with a guest or customer coming to your home or business. A well-paved driveway, free of cracks and potholes, indicates that you care about your property. It also shows that you’re concerned with appearances and the safety of your visitors and their vehicles. There are several options for driveway surfaces. However, asphalt is the best option and is a preferred choice by many home and business owners. If you’re considering asphalt paving in Annapolis MD, here are some commonly asked questions about asphalt paving:

What is Asphalt Made Of?

Asphalt pavements are made of a mixture of stones, sand, and liquid asphalt cement. The sand and rocks are heated and then mixed with the asphalt cement (liquefied at around 300 degrees Fahrenheit). The mixture is then delivered to a driveway for the application while still hot. Finally, it is laid on the prepared surface and left to cool down.

How Long Does It Take to Dry?

As soon as the asphalt mixture is laid out on the driveway, it starts to cool and harden. It creates a firm surface that you can park and drive on fairly quickly. Yet, we advise you not to operate heavy commercial vehicles or machinery on the surface immediately after paving.

How Long Does Asphalt Paving Last?

A well-installed and maintained asphalt driveway usually lasts more than 15 years without requiring resurfacing. Many factors determine the lifespan of an asphalt driveway, including the nature of traffic it handles.

What are the Benefits of an Asphalt Driveway?

Asphalt driveways are smooth, durable, and more affordable compared to other common paving options. However, it’s crucial that you hire an experienced and professional company to handle your asphalt paving. Hiring just any contractor could be detrimental. They could do a substandard job, pose a safety risk to the occupants in your property, and make you incur expensive re-work costs.

Asphalt Paving in Annapolis MD by A&M Asphalt Paving

At A&M Asphalt Paving, we’re a fully licensed and insured company offering professional asphalt paving in Annapolis MD and the surrounding area. We’re a full-service asphalt company with the resources to handle both residential and commercial paving projects of any scale. With over 30 years of experience in this industry, we guarantee you the ultimate satisfaction!

Contact us today for a free estimate on your project!

Why You Should Go with Full-Depth Asphalt

asphalt paving in Bowie MD -- A&M Asphlat Paving

Asphalt is an attractive, popular, and durable choice for the driveway of any home or business. All over the country individuals and businesses are choosing asphalt for their driveways over gravel or concrete. With the right company doing the job, asphalt paving in Bowie, MD can be easier than ever. Take the fuss out paving your driveway or parking lot and make sure you go with true professionals that will get the job done right.

The Best Method

Researchers at Off The Throttle claim that gravel can even cause premature damage to your car when rocks get stuck on places they aren’t supposed to be. Experts at The Spruce agree that asphalt is the superior choice over gravel or concrete, which can be costly and require more maintenance than asphalt. Asphalt can also be driven on almost immediately in most cases, which means you spend less time without a driveway.

There are several different methods for laying asphalt. The most durable option is full-depth asphalt, according to the National Asphalt Pavement Association. Using this method, the driveway is made completely out of the paving mixture which aids in durability. Aggregate is laid down and compacted in the area set to be paved. Next, the paving mixture is poured and flattened.

The full-depth asphalt method is designed to keep water out of the pavement. This prevents the asphalt from freezing and swelling during frigid temperatures. Swelling is one of the causing of cracking in the pavement which requires extra maintenance costs.

Save Time. Save Money.

The average American spends nearly $1000 a year on car maintenance and repairs each year, according to the Bureau of Labor and Statistics. Don’t add to that by using gravel for your driveway. Concrete can cost twice as much as asphalt. Do your wallet a favor and go with the smartest and most cost-effective choice for your home or business.

Need Asphalt Paving in Bowie MD?

Whether paving a parking lot or driveway for your home or business, A&M Asphalt Paving has you covered. Our team of licensed professionals can help with your seal coating, snow removal, and patching needs as well as laying down a new driveway or parking lot. Contact us today for a free estimate!

Ideas to Improve Your Driveway

driveway paving in Columbia MD -- A&M Asphalt Paving

When pulling up to someone’s home, what is one of the first things you notice? Most likely the driveway will be at the top of that list. Not only does a clean, paved driveway improve your home’s appearance, but it can also increase your property value. A&M Asphalt Paving specializes in driveway paving in Columbia MD and the surrounding areas. If you are looking at your own driveway and feel like it needs some work, here are some ways to enhance its look and make it one that you can be proud of.

Hire a Landscaper

Hiring a professional landscaper is an investment that you will be happy you made. They have the training and tools to create a stunning lawn and add interesting plants, resulting in an improved driveway. Along with a well-landscaped yard, adding lighting along the edges of the driveway really makes it stand out.

Make Repairs

Does your driveway have a few cracks? Easily fix these eyesores with a professional driveway paving company. These experts have the equipment needed to either fill in the cracks or completely resurface the driveway with a new asphalt coating.

Add an Asphalt Sealcoating

Having a paved driveway is great, but once it starts to fade it loses its luster. Adding asphalt sealcoating to the driveway will not only keep the driveway looking like new for several years, but will protect it against adverse weather conditions, such as rain or snow. It acts as a waterproof agent that will keep your driveway looking like new. As nice as asphalt sealcoating can make your driveway look, make sure to get it reapplied every two to four years to keep it looking like new.

Driveway Paving in Columbia MD: A&M Paving

If you are in need of a company that handles driveway paving in Columbia MD and in many other areas in Maryland, A&M Paving can help. We provide a wide range of services for commercial and residential properties, including:

  • Asphalt Resurfacing
  • Asphalt Patching
  • Seal Coating
  • Complete Driveway Rip-Out
  • Snow Removal

We are a full-service, licensed, and insured business that can handle simple maintenance to big driveway and parking lot projects, big or small. Our professionals have over 30 years of experience, giving us the knowledge and experience needed to complete any asphalt job. Contact us for more information about our asphalt and driveway services.

Driveway Paving Options to Consider

driveway paving in Glen Burnie -- A&M Asphalt Paving

The driveway is the first impression of your home to a guest, so its design and material should be the best. Whether your old driveway is in desperate need of repair, or you’re putting in a driveway for a new construction property, there are several material options to choose from. At A&M Asphalt Paving we expertly provide driveway paving in Glen Burnie MD, Pasadena and beyond. Be sure that you’ve considered the pros and cons of each material to determine which option is right for your home. Read on for more information.

Driveway Paving with Asphalt

Asphalt is traditional, simple, and the most popular driveway paving material across the country because it is very economical in the initial installation. Also, its dark appearance can add a rich tone to the overall look of your home. Putting in an asphalt driveway can create a stable, long-lasting driving surface. However, it needs some maintenance. It will be necessary to have your driveway seal coated to restore that fresh, dark appearance.

Gravel Driveways

Gravel can make your driveway look impressive. Aside from its durability, gravel is highly sought after for its aesthetically attractive look. Gravel comes in yellow, pink, white, mauve, black, and many other colors. You can select from various finishes, patterns, and shapes, including basket weave, or cobble-lock based on your own specific taste. Although the installation cost for gravel driveways are low, ongoing maintenance is required to keep them in good condition.

Tar and Chip

Tar and chip is another option that gives your driveway a distinct look and feel. In this, the stones and asphalt are mixed, providing a rustic look. Plus, they are economical and look quite different.

When you are preparing for driveway paving in Glen Burnie MD, and the surrounding area, opt for a contractor who is knowledgeable with years of experience. At A&M Asphalt Paving we have successfully installed various types of driveways in every shape and size. Our experts will evaluate various paving materials depending on your needs. Then, we’ll be happy to assist you in making the right decision for your home. We also excel in asphalt patching, driveway seal coating and parking lot paving. Contact us today.